For safety engineers

Safety engineers track compliance by location. HeavyCivilHelper pins every BMP, inspection hold, and corrective action to the spot where it applies.

SWPPP BMPs, ADA accommodations, ESHA buffer zones, and safety observations — logged with photos at the GPS coordinate, ready when the agency inspector arrives unannounced.

What safety engineers track on the map

• BMP pins at GPS coordinates — Every BMP installation logged at the exact field location — silt fence, inlet protection, fiber rolls, check dams. Installation photo attached at the time of installation.
• Photo documentation tied to location and date — Timestamped photos at the GPS pin — the compliance record shows the BMP was in place at the right location on the right date.
• ADA accommodation tracking by location — Each pedestrian detour and temporary accessible path is a pin with photo and status. Compliance documentation without searching paper forms.
• ESHA buffer zones drawn on the project map — Sensitive habitat boundaries visible to the whole field team. Corrective actions logged at the GPS coordinate where they apply.
• Corrective action tracking from identified to closed — Each corrective action is a pin with an opening photo (condition found), status updates, and a closing photo (condition corrected). The compliance timeline is documented.